Difference between revisions of "Compiling OpenCV with GStreamer Support"
(Created page with "=Install previous GStreamer dependencies= <source lang="bash"> sudo apt-get install gstreamer1.0* sudo apt install ubuntu-restricted-extras sudo apt install libgstreamer1.0-d...") |
(→Check configuration log) |
||
Line 46: | Line 46: | ||
✔ Verify if it has Python 3: section and all interpreter and path are right. (If they aren’t there, check the numpy package) | ✔ Verify if it has Python 3: section and all interpreter and path are right. (If they aren’t there, check the numpy package) | ||
− | ✔ Check the GStreamer section. (If | + | ✔ Check the GStreamer section. (If it does not indicates '''YES''', go check GStreamer lib package) |
[[File:Opencv configure.png|600px|center]] | [[File:Opencv configure.png|600px|center]] |
Revision as of 09:54, 9 December 2019
Contents
Install previous GStreamer dependencies
sudo apt-get install gstreamer1.0*
sudo apt install ubuntu-restricted-extras
sudo apt install libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev
Install compiler and building dependencies
sudo apt-get install build-essential
sudo apt-get install cmake git libgtk2.0-dev pkg-config libavcodec-dev libavformat-dev libswscale-dev
sudo apt-get install python-dev python-numpy libtbb2 libtbb-dev libjpeg-dev libpng-dev libtiff-dev libjasper-dev libdc1394-22-dev
pip3 install numpy
Obtain source code from Github
git clone https://github.com/opencv/opencv.git
cd opencv/
git checkout 4.1.0
Configure with required flags
mkdir build
cd build
cmake -D CMAKE_BUILD_TYPE=RELEASE \
-D CMAKE_INSTALL_PREFIX=/usr/local \
-D INSTALL_PYTHON_EXAMPLES=ON \
-D INSTALL_C_EXAMPLES=OFF \
-D PYTHON_EXECUTABLE=$(which python3) \
-D BUILD_opencv_python2=OFF \
-D CMAKE_INSTALL_PREFIX=$(python3 -c "import sys; print(sys.prefix)") \
-D PYTHON3_EXECUTABLE=$(which python3) \
-D PYTHON3_INCLUDE_DIR=$(python3 -c "from distutils.sysconfig import get_python_inc; print(get_python_inc())") \
-D PYTHON3_PACKAGES_PATH=$(python3 -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())") \
-D WITH_GSTREAMER=ON \
-D BUILD_EXAMPLES=ON ..
Check configuration log
✔ Verify if it has Python 3: section and all interpreter and path are right. (If they aren’t there, check the numpy package)
✔ Check the GStreamer section. (If it does not indicates YES, go check GStreamer lib package)
Building
It will last some time. Please be patient.
sudo make -j4
Install the package
sudo make install
sudo ldconfig