Difference between revisions of "Coral from Google/Introduction/Getting Started"
(→Software requirements) |
(→Software requirements) |
||
Line 38: | Line 38: | ||
fastboot --version | fastboot --version | ||
</pre> | </pre> | ||
+ | |||
+ | 3. Install the Mendel Development Tool (MDT). | ||
+ | |||
+ | This is the tool that will be used to connect with the Dev board. To install it, run this command: | ||
+ | |||
+ | <pre> | ||
+ | pip3 install --user mendel-development-tool | ||
+ | <\pre> | ||
<noinclude> | <noinclude> | ||
{{Google Coral/Foot|Introduction|Introduction/SoM_Overview}} | {{Google Coral/Foot|Introduction|Introduction/SoM_Overview}} | ||
</noinclude> | </noinclude> |
Revision as of 19:23, 19 March 2020
Coral from Google | |
---|---|
Error creating thumbnail: Unable to save thumbnail to destination ![]() | |
Introduction | |
|
|
GStreamer | |
|
|
GstInference | |
|
|
Camera Drivers | |
|
|
Reference Documentation | |
Contact Us |
The following guide is based on the official Coral Dev board started guide.
Hardware requirements
Besides the Coral Dev board, you need the following hardware:
- Linux or Mac computer
- USB-A to USB-micro-B cable (to connect your PC to the board's serial port)
- USB-A to USB-C cable (to connect your PC to the board's data port)
- 2 - 3A (5V) USB Type-C power supply (such as a phone charger)
- Ethernet cable or Wi-Fi connection
Software requirements
1. Install a console serial program, such as screen, picocom or minicom.
2. Install the latest version of the fastboot tool.
Download it from the Android SDK Platform-tools and then run the following commands:
mkdir -p ~/.local/bin sudo mv ~/Downloads/platform-tools/fastboot ~/.local/bin/
To verify the installation run the following:
fastboot --version
3. Install the Mendel Development Tool (MDT).
This is the tool that will be used to connect with the Dev board. To install it, run this command:
pip3 install --user mendel-development-tool <\pre>