Difference between revisions of "Getting started with AI on NXP i.MX8M Plus/Introduction/Overview/i.MX8M Plus hardware specifications"
m |
|||
| Line 8: | Line 8: | ||
--> | --> | ||
| − | The board used in this entire research is the Variscite DART-MX8M-PLUS based on NXP i.MX8M Plus | + | The board used in this entire research is the Variscite DART-MX8M-PLUS based on NXP i.MX8M Plus and some of the main characteristics are listed in the table below. |
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 06:30, 30 November 2021
 | Getting started with AI on NXP i.MX8M Plus RidgeRun documentation is currently under development. |
|
The board used in this entire research is the Variscite DART-MX8M-PLUS based on NXP i.MX8M Plus and some of the main characteristics are listed in the table below.
| Hardware module | Specification |
|---|---|
| CPU | - 4 cores ARM Cortex A53. - Frequency: [1200, 1800] Hz. - Supported 32 and 64 bits. - One thread per core. |
| GPU | - 3D GPU GC7000UltraLite. - 2D GPU GC520L. |
| NPU | - Reaches up to 2.3 TOP/s. - Optimized for voice and image recognition, object detection. - Uses Winograd Algorithm. - Supports 8 and 16 bits operations. |
| RAM | - 4 GB. - LPDDR4-4000. |
Note: For more information please visit the Official Variscite site.
