|
|
(4 intermediate revisions by 2 users not shown) |
Line 1: |
Line 1: |
− | =Install previous GStreamer dependencies=
| + | We have unified these instructions in our main [[Compiling OpenCV from Source]] page. |
| | | |
− | <source lang="bash">
| + | [[Category:GStreamer]] |
− | sudo apt-get install gstreamer1.0*
| |
− | sudo apt install ubuntu-restricted-extras
| |
− | sudo apt install libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev
| |
− | </source>
| |
− | | |
− | =Install compiler and building dependencies=
| |
− | | |
− | <source lang="bash">
| |
− | sudo apt-get install build-essential
| |
− | sudo apt-get install cmake git libgtk2.0-dev pkg-config libavcodec-dev libavformat-dev libswscale-dev
| |
− | sudo apt-get install python-dev python-numpy libtbb2 libtbb-dev libjpeg-dev libpng-dev libtiff-dev libdc1394-22-dev
| |
− | sudo apt-get install python3-pip python3-numpy
| |
− | </source>
| |
− | | |
− | =Obtain source code from Github=
| |
− | | |
− | <source lang="bash">
| |
− | git clone https://github.com/opencv/opencv.git
| |
− | cd opencv/
| |
− | git checkout 4.1.0
| |
− | </source>
| |
− | | |
− | =Configure with required flags=
| |
− | <source lang="bash">
| |
− | mkdir build
| |
− | cd build
| |
− | cmake -D CMAKE_BUILD_TYPE=RELEASE \
| |
− | -D CMAKE_INSTALL_PREFIX=/usr/local \
| |
− | -D INSTALL_PYTHON_EXAMPLES=ON \
| |
− | -D INSTALL_C_EXAMPLES=OFF \
| |
− | -D PYTHON_EXECUTABLE=$(which python3) \
| |
− | -D BUILD_opencv_python2=OFF \
| |
− | -D CMAKE_INSTALL_PREFIX=$(python3 -c "import sys; print(sys.prefix)") \
| |
− | -D PYTHON3_EXECUTABLE=$(which python3) \
| |
− | -D PYTHON3_INCLUDE_DIR=$(python3 -c "from distutils.sysconfig import get_python_inc; print(get_python_inc())") \
| |
− | -D PYTHON3_PACKAGES_PATH=$(python3 -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())") \
| |
− | -D WITH_GSTREAMER=ON \
| |
− | -D BUILD_EXAMPLES=ON ..
| |
− | </source>
| |
− | | |
− | =Check configuration log=
| |
− | | |
− | ✔ Verify if it has Python 3: section and all interpreter and path are right. (If they aren’t there, check the numpy package)
| |
− | | |
− | ✔ Check the GStreamer section. (If it does not indicate '''YES''', go check GStreamer lib package)
| |
− | | |
− | [[File:Opencv configure.png|600px|center]] | |
− | | |
− | =Building=
| |
− | | |
− | It will last some time. Please be patient.
| |
− | <source lang="bash">
| |
− | sudo make -j4
| |
− | </source>
| |
− | | |
− | =Install the package=
| |
− | | |
− | <source lang="bash">
| |
− | sudo make install
| |
− | sudo ldconfig
| |
− | </source>
| |