Difference between revisions of "DeepStream Reference Designs/Getting Started/Environment Setup"
m |
|||
Line 33: | Line 33: | ||
== Install GstD == | == Install GstD == | ||
− | + | The process to install [[GStreamer_Daemon_-_Building_GStreamer_Daemon | GStreamer Daemon]] | |
== Getting the code == | == Getting the code == |
Revision as of 12:47, 7 June 2022
DeepStream Reference Designs | |
---|---|
Getting Started | |
|
|
Project Architecture | |
|
|
Reference Designs | |
|
|
Customizing the Project | |
|
|
Contact Us | |
|
This page describes the fundamentals of RidgeRun's DeepStream Reference Designs. After reading this page it should be clear if the product meets your requirements for building your own applications.
System Setup
We offer several versions of the system, all based on the NVIDIA Jetson boards. Small places that use a single or dual camera may use a Jetson Nano, while big commerce with 32 cameras may need to use the Jetson Xavier AGX.
- RTSP Cameras: 1 to 8 simultaneous cameras.
- Jetson Board: portable through Jetson Nano, TX2, NX, and AGX development kits.
The system is based on NVIDIA's DeepStream to take advantage of the board's hardware and multimedia capabilities.
Dependencies
System Dependencies
This project has the following system dependencies:
- pkg-config
- gtk-doc-tools
- libgstreamer1.0-dev
- libgstreamer-plugins-base1.0-dev
- gstreamer1.0-tools
- gstreamer1.0-plugins-good
- gstreamer1.0-libav
- python3-pip
Linux
In Debian based systems, you may install the dependencies with the following command:
sudo apt-get install -y python3 python3-pip python3-setuptools python3-wheel ninja-build pkg-config gtk-doc-tools libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev gstreamer1.0-tools gstreamer1.0-plugins-good gstreamer1.0-libav libopencv-dev
Install GstD
The process to install GStreamer Daemon
Getting the code
git clone XXXX
To install the project, you must run de following command:
sudo python3 setup.py install