GstWebRTC - GstWebRTCBin

← WebRTC Fundamentals

⌂ Home

→ Evaluating GstWebRTC

---

This pages gives an overview of the GstWebRTCBin element.

Architecture

Ridgerun's GstWebRTCBin can be used as a sender-receiver endpoint, as shown in Figure 1. If a pipeline uses GstWebRTCBin element, it becomes a send-receive endpoint. GstWebRTCBin may receive and send audio, video or both simultaneously.

Configurations

The supported capabilities are determined at runtime based on the pads that were requested for the elements. Simply said, if a GstWebRTCBin was created with video and audio pads, it will be capable of sending and receiving both medias. Table 1 summarizes the complete set of possible configurations. At the time being, only one pad of each media type can be created.

Table 1. GstWebRTCBin Supported Capabilities

Send/Receive Audio Only		Example pipeline
Send/Receive Video Only		Example pipeline
Send/Receive Audio and Video		Example pipeline
Send Video - Receive Audio		Example pipeline
Send Audio - Receive Video		Example pipeline
Send Video and Audio - Receive Audio		Example pipeline
Send Video and Audio - Receive Video		Example pipeline
Send Audio - Receive Audio and Video		Example pipeline
Send Video - Receive Audio and Video		Example pipeline

---

← WebRTC Fundamentals

⌂ Home

→ Evaluating GstWebRTC