CUDA Accelerated GStreamer Camera Undistort - Performance - Xavier
CUDA Accelerated GStreamer Camera Undistort | |
---|---|
Undistort Basics | |
|
|
Getting Started | |
|
|
User Guide | |
|
|
Examples | |
|
|
Performance | |
|
|
Contact Us |
The performance of the cuda unidstort element depends mainly on the input image resolution.
The following sections show the measurements of the cuda-undistort (FPS and Latency) for multiple image resolutions; as well as the impact of changing the distortion model.
Platform Setup
The performance measurements were done with the AGX Xavier in 30W All mode, which can be activated with
sudo nvpmodel -m 3
The following sections show a comparison between using the platform at maximum frequency (With jetson_clocks) and in base mode. This mode can be set as follows:
sudo /usr/bin/jetson_clocks
Framerate
The average Frames per Second measurements are shown in the following charts, for multiple image resolutions. Also, the impact of executing or not the jetson_clocks script is shown in the results.
Latency