NXP SABRE Platform for Smart Devices Based on the i.MX 6 Series
Revision as of 10:55, 25 June 2013 by Efernandez (talk | contribs)
**************************PAGE UNDER CONSTRUCTION**************************
RidgeRun is currently developing an SDK for the iMX6Q-Sabre-SDP from Freescale. For now, this board is supported with the Evaluation SDK. You can download the evaluation SDK for the Sabre-SDP from the RidgeRun download center.
Contents
SABRE Platform for Smart Devices Based on the iMX6 Series
Description
The iMX6 SabreLite Board is a low cost development plataform using the Freescale iMX6Quad processor enabling a rapid development of multimedia applications.
Some of the highlights include:
- Quad-Core ARM® Cortex A9 processor at 1GHz
- 1GByte of 64-bit wide DDR3 @ 532MHz
- Three display ports (RGB, LVDS, and HDMI 1.4a)
- Two camera ports (1xParallel, 1x MIPI CSI-2)
- Multi-stream-capable HD video engine delivering
- H.264 1080p60 decode, 1080p30 encode and 3-D video playback in HD
- Triple Play Graphics system consisting of a Quad-shader 3D unit capable of 200MT/s, and a separate 2-D and separate OpenVG Vertex acceleration engine for superior 3D, 2D and user interface acceleration
- Serial ATA 2.5 (SATA) at 3Gbps
- Dual SD 3.0/SDXC card slots
- PCIe port (1 lane)
- Analog (headphone/mic) and Digital (HDMI) audio
- Compact size (3″x3″)
- 10/100/Gb IEEE1588 Ethernet
- 10-pin JTAG interface
- 3 High speed USB ports (2xHost, 1xOTG)
- 1xCAN2 port
- I2C
- GPIOs
Features Supported by the SDK
- U-boot-2013.01-rc1 + env function support to read your environment from a *.txt file in a SD card
- Linux Kernel 3.0.35
- Gstreamer-0.10.36
- Freescale gst-plugins 3.0.5
- Multi-Display
- Multi-Overlay
- Hardware based audio and video codecs
- SD and NFS file system support
- Boot from SD3, SD4 or SPI-NOR with an easy installation
- Toolchain based on codesourcery 2009q1
