U-Boot 2010.06 (Apr 29 2013 - 15:46:20)
U-Boot SPL 2015.07 (Jun 30 2016 - 18:21:30)
DRA752-GP ES2.0
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2015.07 (Jun 30 2016 - 18:21:30 -0600)
CPU : DRA752-GP ES2.0
Board: AM572x EVM REV A.30
I2C: ready
DRAM: 2 GiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
reading uboot.env
** Unable to read "uboot.env" from mmc0:1 **
Using default environment
SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
SCSI: SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
scanning bus for devices...
Found 0 device(s).
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
80 bytes read in 2 ms (39.1 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc0 ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading zImage
3398312 bytes read in 173 ms (18.7 MiB/s)
reading am57xx-evm-es2plus.dtb
101535 bytes read in 10 ms (9.7 MiB/s)
Booting from mmc0 ...
Kernel image @ 0x82000000 [ 0x000000 - 0x33daa8 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Device Tree to 8ffe4000, end 8ffffc9e ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.18-gbbe8cfc (dgarbanzo@ridgerun-GA-890FXA-UD5) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP PREEMPT Tue Jun 28 14:23:30 CST 2016
[ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: TI AM572x EVM ES2+
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB
[ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB
[ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB
[ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB
[ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool
[ 0.000000] cma: Reserved 24 MiB at 0x00000000fe400000
[ 0.000000] Forcing write-allocate cache policy for SMP
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] OMAP4: Map 0x00000000ffd00000 to fe600000 for dram barrier
[ 0.000000] DRA752 ES2.0
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ee52e000 s17088 r8192 d23872 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 472658
[ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1681172K/1897472K available (6347K kernel code, 287K rwdata, 2200K rodata, 336K init, 258K bss, 27884K reserved, 188416K cma-reserved, 1291264K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0861074 (8549 kB)
[ 0.000000] .init : 0xc0862000 - 0xc08b6000 ( 336 kB)
[ 0.000000] .data : 0xc08b6000 - 0xc08fdca8 ( 288 kB)
[ 0.000000] .bss : 0xc0900000 - 0xc0940930 ( 259 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000427] Architected cp15 timer(s) running at 6.14MHz (virt).
[ 0.000457] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
[ 0.000462] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns
[ 0.000473] Switching to timer-based delay loop, resolution 162ns
[ 0.001010] Console: colour dummy device 80x30
[ 0.001025] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2'
[ 0.001032] This ensures that you still see kernel messages. Please
[ 0.001037] update your kernel commandline.
[ 0.001050] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)
[ 0.001064] pid_max: default: 32768 minimum: 301
[ 0.001146] Security Framework initialized
[ 0.001183] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001192] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001721] Initializing cgroup subsys blkio
[ 0.001734] Initializing cgroup subsys memory
[ 0.001760] Initializing cgroup subsys devices
[ 0.001772] Initializing cgroup subsys freezer
[ 0.001785] Initializing cgroup subsys perf_event
[ 0.001807] CPU: Testing write buffer coherency: ok
[ 0.002047] /cpus/cpu@0 missing clock-frequency property
[ 0.002093] /cpus/cpu@1 missing clock-frequency property
[ 0.002103] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002138] Setting up static identity map for 0x800082c0 - 0x80008318
[ 0.060796] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.060856] Brought up 2 CPUs
[ 0.060870] SMP: Total of 2 processors activated (24.59 BogoMIPS).
[ 0.060876] CPU: All CPU(s) started in SVC mode.
[ 0.061256] devtmpfs: initialized
[ 0.087583] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.088373] omap_hwmod: l3_main_2 using broken dt data from ocp
[ 0.281448] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.285412] pinctrl core: initialized pinctrl subsystem
[ 0.286233] NET: Registered protocol family 16
[ 0.287122] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.310618] cpuidle: using governor ladder
[ 0.340647] cpuidle: using governor menu
[ 0.348946] OMAP GPIO hardware version 0.1
[ 0.355342] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 !
[ 0.380391] No ATAGs?
[ 0.380420] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.380429] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.380913] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ 0.380923] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ 0.381504] OMAP DMA hardware revision 0.0
[ 0.416405] edma 43300000.edma: memcpy is disabled
[ 0.421290] edma 43300000.edma: TI EDMA DMA engine driver
[ 0.424148] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 0.429466] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[ 0.429644] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[ 0.429800] omap-iommu 58882000.mmu: 58882000.mmu registered
[ 0.429950] omap-iommu 55082000.mmu: 55082000.mmu registered
[ 0.430216] omap-iommu 41501000.mmu: 41501000.mmu registered
[ 0.430402] omap-iommu 41502000.mmu: 41502000.mmu registered
[ 0.430635] vgaarb: loaded
[ 0.431026] SCSI subsystem initialized
[ 0.432144] palmas 0-0058: Irq flag is 0x00000008
[ 0.452511] palmas 0-0058: Muxing GPIO fd, PWM 0, LED 0
[ 0.534725] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[ 0.535279] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
[ 0.535849] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
[ 0.536049] media: Linux media interface: v0.10
[ 0.536106] Linux video capture interface: v2.00
[ 0.536148] pps_core: LinuxPPS API ver. 1 registered
[ 0.536155] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.536181] PTP clock support registered
[ 0.536780] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400
[ 0.537073] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400
[ 0.537354] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[ 0.537636] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[ 0.537907] Advanced Linux Sound Architecture Driver Initialized.
[ 0.538524] Switched to clocksource arch_sys_counter
[ 0.548747] NET: Registered protocol family 2
[ 0.549293] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.549361] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.549485] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.549534] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.549565] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.549711] NET: Registered protocol family 1
[ 0.549938] RPC: Registered named UNIX socket transport module.
[ 0.549947] RPC: Registered udp transport module.
[ 0.549953] RPC: Registered tcp transport module.
[ 0.549959] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.550944] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[ 0.550978] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.552771] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.552850] audit: initializing netlink subsys (disabled)
[ 0.552880] audit: type=2000 audit(0.530:1): initialized
[ 0.560147] VFS: Disk quotas dquot_6.6.0
[ 0.560316] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.562272] NFS: Registering the id_resolver key type
[ 0.562298] Key type id_resolver registered
[ 0.562306] Key type id_legacy registered
[ 0.562360] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.563681] NET: Registered protocol family 38
[ 0.563758] bounce: pool size: 64 pages
[ 0.563913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.563930] io scheduler noop registered
[ 0.563942] io scheduler deadline registered
[ 0.563977] io scheduler cfq registered (default)
[ 0.567479] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 size 1124
[ 0.576910] omap_hwmod: ocp2scp3: _wait_target_disable failed
[ 0.607311] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00
[ 0.607324] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 0.607335] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[ 0.607346] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.607451] pci 0000:00:00.0: IOMMU is currently not supported for PCI
[ 0.607723] PCI: bus0: Fast back to back transfers disabled
[ 0.607852] PCI: bus1: Fast back to back transfers enabled
[ 0.607948] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff]
[ 0.607962] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff]
[ 0.607975] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.608942] backlight supply power not found, using dummy regulator
[ 0.611899] OMAP DSS rev 6.1
[ 0.612160] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)
[ 0.612677] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops)
[ 0.617219] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[ 0.620212] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250
[ 1.602607] console [ttyS2] enabled
[ 1.606723] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 302, base_baud = 3000000) is a 8250
[ 1.616740] [drm] Initialized drm 1.1.0 20060810
[ 1.629898] brd: module loaded
[ 1.637130] loop: module loaded
[ 1.641294] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.698538] davinci_mdio 48485000.mdio: davinci mdio revision 1.6
[ 1.704663] davinci_mdio 48485000.mdio: detected phy mask fffffff9
[ 1.714825] libphy: 48485000.mdio: probed
[ 1.718876] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY
[ 1.728585] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY
[ 1.738877] cpsw 48484000.ethernet: Detected MACID = a0:f6:fd:ab:af:1c
[ 1.746142] cpsw 48484000.ethernet: cpsw: Detected MACID = a0:f6:fd:ab:af:1d
[ 1.754520] mousedev: PS/2 mouse device common for all mice
[ 1.760139] i2c /dev entries driver
[ 1.766006] gpio-fan gpio_fan: GPIO fan initialized
[ 1.771831] tmp102 0-0048: initialized
[ 1.777563] omap_hsmmc 4809c000.mmc: Got CD GPIO
[ 1.782637] vdd_3v3: supplied by regen1
[ 1.819170] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode
[ 1.825551] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode
[ 1.897989] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.908881] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.909499] mmc0: new high speed SDHC card at address aaaa
[ 1.909825] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 1.925889] mmcblk0: p1 p2
[ 1.929744] oprofile: using timer interrupt.
[ 1.934223] Initializing XFRM netlink socket
[ 1.938591] NET: Registered protocol family 17
[ 1.943080] NET: Registered protocol family 15
[ 1.947608] Key type dns_resolver registered
[ 1.952027] omap_voltage_late_init: Voltage driver support not added
[ 1.958683] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm
[ 1.964978] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm
[ 1.971831] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm
[ 1.973188] mmc1: MAN_BKOPS_EN bit is not set
[ 1.982049] mmc1: new DDR MMC card at address 0001
[ 1.982370] mmcblk1: mmc1:0001 S10004 3.56 GiB
[ 1.982508] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
[ 1.982614] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
[ 1.983198] mmcblk1: p1 p2
[ 2.006583] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm
[ 2.014455] Power Management for TI OMAP4+ devices.
[ 2.019605] ThumbEE CPU extension supported.
[ 2.023899] Registering SWP/SWPB emulation handler
[ 2.029734] dmm 4e000000.dmm: workaround for errata i878 in use
[ 2.036921] dmm 4e000000.dmm: initialized all PAT entries
[ 2.060414] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.067053] [drm] No driver support for vblank timestamp query.
[ 2.075005] [drm] Enabling DMM ywrap scrolling
[ 2.120496] Console: switching to colour frame buffer device 100x30
[ 2.128645] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
[ 2.134587] omapdrm omapdrm.0: registered panic notifier
[ 2.168642] omapwb-m2m: Device registered as video10
[ 2.173626] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
[ 2.179837] hctosys: unable to open rtc device (rtc0)
[ 2.193105] ldousb: disabling
[ 2.196351] vmmcwl_fixed: disabling
[ 2.199871] aic_dvdd_fixed: disabling
[ 2.203688] ALSA device list:
[ 2.206663] No soundcards found.
[ 2.210559] Waiting 2 sec before mounting root device...
[ 4.220649] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem
[ 4.227469] EXT3-fs (mmcblk0p2): write access will be enabled during recovery
[ 4.236055] kjournald starting. Commit interval 5 seconds
[ 4.241175] EXT3-fs (mmcblk0p2): recovery complete
[ 4.241180] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 4.241207] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
[ 4.242450] devtmpfs: mounted
[ 4.242666] Freeing unused kernel memory: 336K (c0862000 - c08b6000)
starting pid 60, tty '': '/etc/rcS'
loading modules
no /etc/modules, exiting
[ 4.374110] EXT3-fs (mmcblk0p2): using internal journal
Starting System
done.
Welcome to
__________ .__ .___ __________
\______ \|__| __| _/ ____ ____ \______ \ __ __ ____
| _/| | / __ | / ___\ _/ __ \ | _/| | \ / \
| | \| |/ /_/ | / /_/ >\ ___/ | | \| | /| | \
|____|_ /|__|\____ | \___ / \___ >|____|_ /|____/ |___| /
\/ \//_____/ \/ \/ \/
Embedded Linux Solutions
For further information see:
http://www.ridgerun.com
[ 4.684839] net eth0: initializing cpsw version 1.15 (0)
Build host: ridgerun-GA-890FXA-UD5
Built by: dgarbanzo
Build date: Thu, 30 Jun 2016 18:20:29 -0600
Build tag: am5728-tievm
Configuring network interfaces
[ 4.790349] net eth0: phy found : id is : 0x221622
[ 7.795438] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 8.167339] net eth1: initializing cpsw version 1.15 (0)
[ 8.250431] net eth1: phy found : id is : 0x221622
Starting D-Bus message bus system
[ 8.319111] random: dbus-daemon urandom read with 25 bits of entropy available
Starting tiipclad daemon
GateMP support enabled on host
Opened log file: lad.txt
numProcessors = 5 id = 0 baseId = 0
Spawned daemon: /usr/bin/lad_dra7xx
.
Starting udev
[ 8.421401] udevd[171]: starting version 182
[ 8.562337] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000
[ 8.571744] remoteproc0: 58820000.ipu is available
[ 8.578098] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 8.614981] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 8.659171] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000
[ 8.669915] remoteproc1: 55020000.ipu is available
[ 8.675045] remoteproc1: Note: remoteproc is still under development and considered experimental.
[ 8.729097] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 8.743321] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc2
[ 8.752290] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000
[ 8.762322] remoteproc2: 40800000.dsp is available
[ 8.772069] remoteproc2: Note: remoteproc is still under development and considered experimental.
[ 8.785278] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 8.813618] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000
[ 8.855477] remoteproc3: 41000000.dsp is available
[ 8.861333] remoteproc3: Note: remoteproc is still under development and considered experimental.
[ 8.870765] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 8.884203] input: pixcir_tangoc as /devices/platform/44000000.ocp/4807c000.i2c/i2c-4/4-005c/input/input0
[ 8.885320] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 8.933239] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1
[ 8.949021] rtc-ds1307 2-006f: SET TIME!
[ 8.953901] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0
[ 8.961025] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[ 8.967118] rtc-ds1307 2-006f: 64 bytes nvram
[ 8.974818] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[ 8.981115] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[ 8.998148] palmas_pwrbutton 48070000.i2c:tps659038@58:tps659038_pwr_button: h/w controlled shutdown duration=12 seconds
[ 9.010734] input: palmas_pwron as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0058/48070000.i2c:tps659038@58:tps659038_pwr_button/input/input1
[ 9.059863] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[ 9.061928] mt9t11x 4-003c: input-clock-freq: 32000000
[ 9.061932] mt9t11x 4-003c: pixel-clock-freq: 96000000
[ 9.088163] mt9t11x 4-003c: Product ID error ffffff87
[ 9.240262] remoteproc1: registered virtio0 (type 7)
[ 9.247920] pruss-rproc 4b200000.pruss: creating platform devices for PRU cores
[ 9.258648] pruss-rproc 4b280000.pruss: creating platform devices for PRU cores
[ 9.285648] remoteproc1: powering up 55020000.ipu
[ 9.286363] remoteproc4: 4b234000.pru0 is available
[ 9.286366] remoteproc4: Note: remoteproc is still under development and considered experimental.
[ 9.286370] remoteproc4: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 9.304769] remoteproc4: powering up 4b234000.pru0
[ 9.304776] remoteproc4: Booting fw image am57xx-pru1_0-fw, size 80704
[ 9.304810] pruss-rproc 4b200000.pruss: configured system_events = 0x1000000000000000 intr_channels = 0x00000001 host_intr = 0x00000001
[ 9.304814] remoteproc4: remote processor 4b234000.pru0 is now up
[ 9.304880] virtio_rpmsg_bus virtio1: rpmsg host is online
[ 9.305426] remoteproc4: registered virtio1 (type 7)
[ 9.305463] virtio_rpmsg_bus virtio1: creating channel rpmsg-pru addr 0x1e
[ 9.305667] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss@4b200000/pru0@4b234000 probed successfully
[ 9.305851] remoteproc5: 4b238000.pru1 is available
[ 9.305854] remoteproc5: Note: remoteproc is still under development and considered experimental.
[ 9.305857] remoteproc5: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 9.310964] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok
[ 9.374369] vip 48990000.vip: loading firmware vpdma-1b8.bin
[ 9.398592] vip 48990000.vip: VPDMA firmware loaded
[ 9.403464] (stk) :sysfs entries created
[ 9.424552] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3493264
[ 9.431979] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1
[ 9.491985] remoteproc1: remote processor 55020000.ipu is now up
[ 9.499156] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 9.504700] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65
[ 9.515954] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20
[ 9.523060] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x66
[ 9.550795] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[ 9.755169] remoteproc5: powering up 4b238000.pru1
[ 9.760110] remoteproc5: Booting fw image am57xx-pru1_1-fw, size 80712
[ 9.767018] pruss-rproc 4b200000.pruss: configured system_events = 0x0800000000000000 intr_channels = 0x00000002 host_intr = 0x00000002
[ 9.767959] aic_dvdd_fixed: supplied by vdd_3v3
[ 9.781597] asoc-simple-card sound@0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok
[ 9.792494] remoteproc5: remote processor 4b238000.pru1 is now up
[ 9.805419] virtio_rpmsg_bus virtio2: rpmsg host is online
[ 9.810969] remoteproc5: registered virtio2 (type 7)
[ 9.816134] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss@4b200000/pru1@4b238000 probed successfully
[ 9.826091] virtio_rpmsg_bus virtio2: creating channel rpmsg-pru addr 0x1f
[ 9.833430] remoteproc6: 4b2b4000.pru0 is available
[ 9.838422] remoteproc6: Note: remoteproc is still under development and considered experimental.
[ 9.847572] remoteproc6: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 9.877449] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin
[ 9.898716] vpe 489d0000.vpe: Device registered as /dev/video0
[ 9.952947] remoteproc6: powering up 4b2b4000.pru0
[ 9.957852] remoteproc6: Booting fw image am57xx-pru2_0-fw, size 80704
[ 9.965077] pruss-rproc 4b280000.pruss: configured system_events = 0x1000000000000000 intr_channels = 0x00000001 host_intr = 0x00000001
[ 9.977325] remoteproc6: remote processor 4b2b4000.pru0 is now up
[ 9.983659] virtio_rpmsg_bus virtio3: rpmsg host is online
[ 9.989717] remoteproc6: registered virtio3 (type 7)
[ 9.994821] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss@4b280000/pru0@4b2b4000 probed successfully
[ 10.005064] virtio_rpmsg_bus virtio3: creating channel rpmsg-pru addr 0x20
[ 10.008834] remoteproc7: 4b2b8000.pru1 is available
[ 10.008838] remoteproc7: Note: remoteproc is still under development and considered experimental.
[ 10.008841] remoteproc7: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 10.045196] remoteproc0: powering up 58820000.ipu
[ 10.050054] remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4917392
[ 10.057070] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1
[ 10.068320] remoteproc0: remote processor 58820000.ipu is now up
[ 10.074939] virtio_rpmsg_bus virtio4: rpmsg host is online
[ 10.080948] remoteproc0: registered virtio4 (type 7)
[ 10.086589] virtio_rpmsg_bus virtio4: creating channel rpmsg-client-sample addr 0x32
[ 10.097880] virtio_rpmsg_bus virtio4: creating channel rpmsg-client-sample addr 0x33
[ 10.105946] virtio_rpmsg_bus virtio4: creating channel rpmsg-omx addr 0x3c
[ 10.114010] virtio_rpmsg_bus virtio4: creating channel rpmsg-rpc addr 0x65
[ 10.164307] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled
[ 10.171188] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 10.179852] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 10.190134] scsi host0: ahci
[ 10.193404] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 358
[ 10.206506] remoteproc7: powering up 4b2b8000.pru1
[ 10.211441] remoteproc7: Booting fw image am57xx-pru2_1-fw, size 80712
[ 10.218108] pruss-rproc 4b280000.pruss: configured system_events = 0x0800000000000000 intr_channels = 0x00000002 host_intr = 0x00000002
[ 10.230414] remoteproc7: remote processor 4b2b8000.pru1 is now up
[ 10.236722] virtio_rpmsg_bus virtio5: rpmsg host is online
[ 10.236744] virtio_rpmsg_bus virtio5: creating channel rpmsg-pru addr 0x21
[ 10.249532] remoteproc7: registered virtio5 (type 7)
[ 10.254630] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss@4b280000/pru1@4b2b8000 probed successfully
[ 10.362070] rpmsg_pru rpmsg0: new rpmsg_pru device: /dev/rpmsg_pru30
[ 10.368789] rpmsg_pru rpmsg3: new rpmsg_pru device: /dev/rpmsg_pru31
[ 10.375852] rpmsg_pru rpmsg4: new rpmsg_pru device: /dev/rpmsg_pru32
[ 10.382459] rpmsg_pru rpmsg9: new rpmsg_pru device: /dev/rpmsg_pru33
[ 10.413137] rpmsg_rpc rpmsg1: probing service dce-callback with src 1024 dst 101
[ 10.428749] rpmsg_rpc rpmsg2: probing service rpmsg-dce with src 1025 dst 102
[ 10.435946] rpmsg_rpc rpmsg1: published functions = 4
[ 10.441509] rpmsg_rpc rpmsg8: probing service rpc_example_2 with src 1024 dst 101
[ 10.449110] rpmsg_rpc rpmsg2: published functions = 8
[ 10.456484] rpmsg_rpc rpmsg8: published functions = 8
[ 10.558541] ata1: SATA link down (SStatus 0 SControl 300)
[ 11.155446] usbcore: registered new interface driver usbfs
[ 11.161055] usbcore: registered new interface driver hub
[ 11.166468] usbcore: registered new device driver usb
[ 11.526625] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.532244] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 11.540476] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010
[ 11.549335] xhci-hcd xhci-hcd.1.auto: irq 452, io mem 0x48890000
[ 11.555534] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.562486] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.569879] usb usb1: Product: xHCI Host Controller
[ 11.574787] usb usb1: Manufacturer: Linux 4.1.18-gbbe8cfc xhci-hcd
[ 11.581018] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 11.587247] hub 1-0:1.0: USB hub found
[ 11.591075] hub 1-0:1.0: 1 port detected
[ 11.595417] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.600963] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 11.608752] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.617007] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 11.623851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.631154] usb usb2: Product: xHCI Host Controller
[ 11.636066] usb usb2: Manufacturer: Linux 4.1.18-gbbe8cfc xhci-hcd
[ 11.642302] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 11.647868] hub 2-0:1.0: USB hub found
[ 11.651700] hub 2-0:1.0: 1 port detected
Please press Enter to activate this console. [ 11.908583] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 11.968585] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 11.988803] usb 2-1: New USB device found, idVendor=0451, idProduct=8140
[ 11.996084] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 12.008934] hub 2-1:1.0: USB hub found
[ 12.012911] hub 2-1:1.0: 4 ports detected
[ 12.048875] usb 1-1: New USB device found, idVendor=0451, idProduct=8142
[ 12.055610] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 12.063261] usb 1-1: SerialNumber: 580B1849DF41
[ 12.088946] hub 1-1:1.0: USB hub found
[ 12.092763] hub 1-1:1.0: 4 ports detected
[ 12.580453] remoteproc3: powering up 41000000.dsp
[ 12.585692] remoteproc2: powering up 40800000.dsp
[ 12.590561] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 21365636
[ 12.597802] remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 21365636
[ 12.604566] omap_hwmod: mmu0_dsp1: _wait_target_disable failed
[ 12.604603] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0
[ 12.604659] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0
[ 12.620435] remoteproc2: remote processor 40800000.dsp is now up
[ 12.622737] virtio_rpmsg_bus virtio7: rpmsg host is online
[ 12.622797] remoteproc2: registered virtio7 (type 7)
[ 12.646315] omap_hwmod: mmu0_dsp2: _wait_target_disable failed
[ 12.652203] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0
[ 12.658116] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0
[ 12.675392] remoteproc3: remote processor 41000000.dsp is now up
[ 12.679293] virtio_rpmsg_bus virtio7: creating channel rpmsg-proto addr 0x3d
[ 12.690132] virtio_rpmsg_bus virtio6: rpmsg host is online
[ 12.690215] virtio_rpmsg_bus virtio6: creating channel rpmsg-proto addr 0x3d
[ 12.703472] remoteproc3: registered virtio6 (type 7)
[ 12.713028] NET: Registered protocol family 41
[ 14.934788] random: nonblocking pool is initialized
[ 21.073554] omap_hwmod: mmu_ipu1: _wait_target_disable failed
[ 21.086512] omap_hwmod: mmu_ipu2: _wait_target_disable failed
[ 23.055948] omap_hwmod: mmu1_dsp2: _wait_target_disable failed
[ 23.068915] omap_hwmod: mmu0_dsp2: _wait_target_disable failed
[ 23.095969] omap_hwmod: mmu1_dsp1: _wait_target_disable failed
[ 23.108954] omap_hwmod: mmu0_dsp1: _wait_target_disable failed
starting pid 282, tty '/dev/ttyS2': '-/bin/sh'
BusyBox v1.20.2 (2016-06-28 14:28:43 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ #