Installing Jetpack 3.0

Installing Jetpack

1.Download JetPack 3.0 from https://developer.nvidia.com/embedded/downloads

2. Move binary into the installation directory, we recommend /home/$USER/JetPack-L4T-3.0/

mkdir -p /home/$USER/JetPack-L4T-3.0/
mv JetPack-L4T-3.0-linux-x64.run /home/$USER/JetPack-L4T-3.0/

1. Set the Jetpack binary as executable and set correct permissions.

cd /home/$USER/JetPack-L4T-2.3
chmod +x JetPack-L4T-3.0-linux-x64.run

2. Install Jetpack.

./JetPack-L4T-3.0-linux-x64.run

3. Press Next to start the installation.

Jetpack3.0 install.png

Figure 1. Start installation

4. Select Jetson TX1 Development Kit (64-bit).

Jetpack3.0 select board.png

Figure 2. Select development environment

Jetpack requires privileges, you have to authenticate.

Error creating thumbnail: Unable to save thumbnail to destination

Jetpack3.0 authentication.png

Figure 3. Component manager

5. Ridgerun recommends selecting standard installation.

Jetpack3.0 component manager.png

Figure 4. Component manager

6. Accept terms and conditions.

Jetpack3.0 accept lic.png

Figure 5. Component manager

7. Wait until the installation will be completed (this may take a while).

Jetpack3.0 completed.png

Figure 6. Installation completed