View source for Qualcomm Robotics RB5/Software Support/Linaro

<noinclude>
{{Qualcomm Robotics RB5/Head|previous=Software_Support/SDK/Installing_SDK|next=Software_Support/Linaro/Getting_started|metakeywords=linaro}}
</noinclude>

{{DISPLAYTITLE:Qualcomm Robotics RB5/RB6 - Linaro|noerror}}

Linaro is a company contributor that works on free and open-source software such as the Linux kernel. They now provide support for the mainline Linux kernel and provide builds based on the Yocto Project and Debian. In this section, you will learn how to get started with Linaro, this will allow you to create Boot Images, flash them in your board, and more. The following sections will provide information about the steps needed to get your Qualcomm Robotics RB5/RB6 up and running.
<br>

*The [[Qualcomm Robotics RB5/Software_Support/Linaro/Getting_started|Getting Started]] section is a guide to installing everything you need in your host computer to work with your RB5/RB6.
*The [[Qualcomm Robotics RB5/Software_Support/Linaro/Installing|Flashing Bootloader]] section is a guide on how to flash the downloaded bootloader in your board.
*The [[Qualcomm Robotics RB5/Software_Support/Linaro/Flash_images|Flashing Boot Image and Rootfs]] section shows the steps to flash your boot image and rootfs in your board.

<noinclude>
{{Qualcomm Robotics RB5/Foot|Software_Support/SDK/Installing_SDK|Software_Support/Linaro/Getting_started}}
</noinclude>