Qualcomm Robotics RB5/RB6 - Linaro

Qualcomm Robotics RB5/RB6
Introduction
SoM Overview Carrier Boards Qualcomm Robotics RB5 developer kit Qualcomm Robotics RB6 platform
Software Development Support
Boot Devices Thundercomm SDK Downloading SDK Installing SDK Generating Image and flashing Linaro Getting Started Flashing Bootloader Flashing Boot Image and Rootfs Special / Debug Modes Setting up board in EDL Mode Setting up board in Fastboot Mode
Development in the Board
Getting into the Board Using ADB Using Serial Console Using SSH Device Setup WiFi setup HDMI setup Update Ubuntu Packages
Build from source
Base Image Customize Image
Capture Subsystem
Hardware Capture Components Software Capture Components Building your own camera sensor driver
Image Processing and Acceleration Software
GPU Profiling Fast CV Installing Hexagon SDK Installing Fast CV Building your own Fast CV application
GStreamer Pipelines
Capture and Display Video Encoding Video Decoding
AI Acceleration
Neural Processing SDK Downloading Requirements Setup SDK Environment Install qtimlesnpe Example Project TensorFlow Example pipeline
Contact Us

Linaro is a company contributor that works on free and open-source software such as the Linux kernel. They now provide support for the mainline Linux kernel and provide builds based on the Yocto Project and Debian. In this section, you will learn how to get started with Linaro, this will allow you to create Boot Images, flash them in your board, and more. The following sections will provide information about the steps needed to get your Qualcomm Robotics RB5/RB6 up and running.

• The Getting Started section is a guide to installing everything you need in your host computer to work with your RB5/RB6.
• The Flashing Bootloader section is a guide on how to flash the downloaded bootloader in your board.
• The Flashing Boot Image and Rootfs section shows the steps to flash your boot image and rootfs in your board.