Installing Jetpack 3.0

Installing Jetpack

1.Download JetPack for L4T 2.3 from https://developer.nvidia.com/embedded/downloads

2. Move binary into installation directory, we recommend /home/$USER/JetPack-L4T-2.3

mkdir -p /home/$USER/JetPack-L4T-2.3
mv JetPack-L4T-2.3-linux-x64.run /home/$USER/JetPack-L4T-2.3/

1. Set the Jetpack binary as executable and set correct permissions.

cd /home/$USER/JetPack-L4T-2.3
chmod +x JetPack-L4T-2.3-linux-x64.run

2. Install Jetpack.

./JetPack-L4T-2.3-linux-x64.run

3. Press Next to start the installation.

jetpack-2_3-installation-01.png

Figure 1. Start installation

4. Select Jetson TX1 Development Kit (64-bit).

jetpack-2_3-installation-03.png

Figure 2. Select development environment

Jetpack3.0 authentication.png

Error creating thumbnail: Unable to save thumbnail to destination

jetpack-2_3-installation-06.png

Figure 3. Component manager

5. Ridgerun recommends select standard installation.

jetpack-2_3-installation-06.png

Figure 3. Component manager

6. Accept.

jetpack-2_3-installation-06.png

Figure 3. Component manager

6. Wait until the installation will be completed (this may take a while).

jetpack-2_3-installation-10.png

Figure 4. Installation completed

Issue: JetPack installation under Ubuntu 16.04 64bit

As NVIDIA recommends Ubuntu 14.04 64bit for Jetpack installation, there is an error installing OpenCV under Ubuntu 16.04 64bit. You can disable it from Jetpack and continue installing. The issue remains the same for Jetpack 2.3 and 2.3.1 versions.