NVIDIA Jetson Orin Nano - Developer Kit Ubuntu Login
 | NVIDIA Jetson Orin Nano RidgeRun documentation is currently under development. |
|
This section describes how to access using each of the different mechanisms.
Physical configuration To prepare your Jetson Orin Nano Developer Kit for use, connect it as follows:
- Connect an external HDMI display to the carrier board’s DisplayPort/HDMI output port.
- Connect a USB keyboard and mouse to the USB A ports.
- Connect the developer kit to your local network via the Ethernet cable to the carrier board's Ethernet port.
- Connect the included AC adapter to the carrier board's power jack. Plug the AC adapter into an appropriately rated electrical outlet.
- Use only the supplied AC adapter, as it is appropriately rated for your device.
Logging in using Ubuntu GUI
After all, the physical configuration is done following these steps:
- Turn on the board.
- You should log in automatically using NVIDIA user. If you don't log in automatically use:
user:nvidia
password:nvidia
or
user:ubuntu
password:ubuntu
 | Note: Use the Orin Nano as any other Ubuntu machine. But keep in mind that the board is running under an ARM64 architecture, so remember that some packages will not be available as any other X86 Ubuntu machine. |
