NVIDIA Jetson Orin - Auvidea X230D
 | NVIDIA Jetson Orin RidgeRun documentation is currently under development. |
|
Auvidea's X230D is meant to address the need to easily migrate from developments based on the AGX Xavier (X221) to the new AGX Orin by fully supporting integration with NVIDIA's SDK.
The X230D delivers industry standard CSI-2 connectors to interface with:
- RPi-camera modules
- ArduCam, Vision Components, Framos, Basler, Allied Vision image sensors
- FPD-Link III
Figure 1: Top view of X230D Carrier for NVIDIA® Jetson AGX Orin™
| Feature | Description |
|---|---|
| AGX Orin power modes | 15W-60W |
| HDMI out | 1x |
| USB 2.0 | 1x (micro, OTG) |
| USB 3.1 | 2x (type A) |
| Networking | 2x RJ45 (RTL8111 PCIe to GbE) |
| PCIe x1 | 1x FPC 22 pin (J37) |
| PCIe x4 | 1x FPC 40 pin (J20) |
| M.2 | 1x Key M 2280 NVME (PCIe x4) |
| CAN |
|
| UART | 1x |
| I2C | 2x |
| CSI-2 | 2x (4 lanes, 22 pin) |
| MCU | yes |
| Crypto chip | 1x (ATSH204A) |
| Autoflash support | yes |
| Debug port | yes |
| Fan connector | 1x (12V, PWM) |
| RGB LED | yes (GPIO controlled) |
| Operating voltage | 12-19V |
| RTC lithium cell | optional (MS621FE) |
| Overvoltage protection | yes |
| Reverse voltage protection | yes |
You can get this board from the X230 Product Page
