NVIDIA Jetson Orin - In Board - Getting in Board - Ubuntu
 | NVIDIA Jetson Orin RidgeRun documentation is currently under development. |
|
This section describes how to access using each of the different mechanisms.
Physical configuration To prepare your Jetson AGX Orin Developer Kit for use, connect it as follows:
- Connect an external HDMI display to the carrier board’s DisplayPort output port. The cable is not provided with the developer kit.
- Connect a USB keyboard and mouse.
- For USB Type-A peripherals, NVIDIA provides a USB to USB-C adapter with the developer kit. You can also connect USB Type-A peripherals to the eStata+USB connector.
- For USB Type-C peripherals, you can connect them to any of the 2 USB-C ports.
- Connect the developer kit to your local network via Ethernet cable to the carrier board's Ethernet port.
- Connect the included AC adapter to the carrier board's power jack. Plug the AC adapter into an appropriately rated electrical outlet.
- Use only the supplied AC adapter, as it is appropriately rated for your device.
Logging in using Ubuntu GUI
After all, the physical configuration is done following these steps:
- Turn on the board
- You should log in automatically using NVIDIA user. If you don't log in automatically use user:nvidia password:nvidia or user:ubuntu password:ubuntu
- Use the Orin as any other Ubuntu machine
