V4L2 FPGA - Supported Platforms - LiteFury

V4L2 FPGA
Error creating thumbnail: Unable to save thumbnail to destination
Introduction
Overview Frame Grabber Sink Filtering Budget Estimator
Getting the Code
How to get the code Building and Installation Guide Running the demo
Examples
Convolutioner Pass Through Video Test Pattern Generator Xilinx OpenCV
GStreamer Pipelines
Filter Mode Frame Grabber
Supported Platforms
PicoEVB Zynq 7000 series Zynq MP-SoC series LiteFury
Contact Us

The LiteFury is an Artix-7-based FPGA that fits into an M.2 M slot (suited for NVME).

Error creating thumbnail: Unable to save thumbnail to destination

PicoEVB

The Artix-7 FPGA has internal clock speeds exceeding 450MHz and provides 51160 logic cells, 240 DSP48 slices, and 4.8 Mbits de BRAM. It also provides 4 digital I/O and 4 Analog I/O. It does not have a built-in JTAG cable. You will need to use the PicoJTAG port and connect a Xilinx-compatible JTAG to work with Vivado and Labtools for its configuration.

Feature	Specification
FPGA	Xilinx Artix 7 - XC7A100T-L2FGG484E
RAM	256MB DDR3-800 (1.6GB/s)
Flash	128Mb
Form Factor	M.2 M slots
Host Interface	PCIe 2.0 x4