Difference between revisions of "Xavier/JetPack 5.0.2/Getting Started/Installing Jetpack"
< Xavier | JetPack 5.0.2 | Getting Started
m (Jrivera moved page Xavier/JetPack 4.0/Getting Started/Installing Jetpack to Xavier/JetPack 4.1/Getting Started/Installing Jetpack: JetPack 4.0 has been replaced by 4.1) |
|||
Line 7: | Line 7: | ||
=Download Installer to Host Computer= | =Download Installer to Host Computer= | ||
− | 1. Download JetPack 4. | + | 1. Download JetPack 4.1 from https://developer.nvidia.com/embedded/downloads |
2. Move binary into installation directory, /home/$USER/JetPack-L4T/ is recommended | 2. Move binary into installation directory, /home/$USER/JetPack-L4T/ is recommended |
Revision as of 17:35, 22 October 2018
Requirements
Supported host operating systems are Ubuntu Linux x64 Version 18.04 or 16.04
Download Installer to Host Computer
1. Download JetPack 4.1 from https://developer.nvidia.com/embedded/downloads
2. Move binary into installation directory, /home/$USER/JetPack-L4T/ is recommended
mkdir -p /home/$USER/JetPack-L4T/
mv JetPack-${VERSION}.run /home/$USER/JetPack-L4T/
3. Set the Jetpack binary as executable and set correct permissions.
cd /home/$USER/JetPack-L4T
chmod +x JetPack-${VERSION}.run
Run the Installer
1. Run the Binary
./JetPack-${VERSION}.run
2. Press next to start the installation
Figure 1. Start Installation
3. Select install location
Figure 2. Installation Configuration
4. Select platform
Figure 3. Select Development Enviroment
5. Select desired components, standard installation is recommended
Figure 4. Component Selection
6. Accept terms and conditions
Figure 5. Terms and Conditions
7. Wait for installation to complete
Figure 6. Terms and Conditions
This might take a while since Jetpack must download all packages and install some of them on the host computer.