Revision as of 12:00, 15 November 2018

Requirements

Supported host operating systems are Ubuntu Linux x64 Version 18.04 or 16.04

2. Move binary into installation directory, /home/$USER/JetPack-L4T/ is recommended

mkdir -p /home/$USER/JetPack-L4T/
mv JetPack-${VERSION}.run /home/$USER/JetPack-L4T/

3. Set the Jetpack binary as executable and set correct permissions.

cd /home/$USER/JetPack-L4T
chmod +x JetPack-${VERSION}.run

1. Run the Binary

./JetPack-${VERSION}.run

2. Press next to start the installation

Figure 1. Start Installation

3. Select install location

Figure 2. Installation Configuration

4. Select platform

Figure 3. Select Development Enviroment

5. Select desired components, standard installation is recommended

Figure 4. Component Selection

6. Accept terms and conditions

Figure 5. Terms and Conditions

7. Wait for installation to complete

Figure 6. Terms and Conditions

This might take a while since Jetpack must download all packages and install some of them on the host computer.

If you want to run JetPack inside a newly created docker container take into account the following considerations.

sudo apt install lsb-release x11-utils libgtk2.0-0 gksudo
ln -s /usr/bin/gksudo /usr/local/bin/pkexec

@@ Line 70: / Line 70: @@
 This might take a while since Jetpack must download all packages and install some of them on the host computer.
+= Considerations for Docker =
+If you want to run JetPack inside a newly created docker container take into account the following considerations.
+<syntaxhighlight lang=bash>
+sudo apt install lsb-release x11-utils libgtk2.0-0 gksudo
+ln -s /usr/bin/gksudo /usr/local/bin/pkexec
+</syntaxhighlight>
 <noinclude>
 {{Xavier/Foot|JetPack 4.1/Getting Started|JetPack 4.1/Getting Started/Wizard Flashing}}
 </noinclude>