Difference between revisions of "Qualcomm Robotics RB5/Development in the Board/Getting into the Board"
m |
|||
| Line 3: | Line 3: | ||
</noinclude> | </noinclude> | ||
__TOC__ | __TOC__ | ||
| − | {{DISPLAYTITLE:Qualcomm Robotics RB5 - Getting into the Board|noerror}} | + | {{DISPLAYTITLE:Qualcomm Robotics RB5/RB6 - Getting into the Board|noerror}} |
| − | The Qualcomm Robotics RB5 can be accessed via the microUSB cable with UART, via USB-C cable with adb and with SSH via ethernet cable. The steps for each method are explained in the links below: | + | The Qualcomm Robotics RB5/RB6 can be accessed via the microUSB cable with UART, via USB-C cable with adb and with SSH via ethernet cable. The steps for each method are explained in the links below: |
<br> | <br> | ||
* The [[Qualcomm Robotics RB5/Development in the Board/Getting_into_the_Board/Using_adb|Using ADB]] section explains how to access the board with ADB. | * The [[Qualcomm Robotics RB5/Development in the Board/Getting_into_the_Board/Using_adb|Using ADB]] section explains how to access the board with ADB. | ||
Latest revision as of 17:10, 31 July 2023
 | Qualcomm Robotics RB5 RidgeRun documentation is currently under development. |
The Qualcomm Robotics RB5/RB6 can be accessed via the microUSB cable with UART, via USB-C cable with adb and with SSH via ethernet cable. The steps for each method are explained in the links below:
- The Using ADB section explains how to access the board with ADB.
- The Using Serial Console section explains how to access the board with UART.
- The Using SSH section explains how to access the board with SSH.
