Difference between revisions of "Birds Eye View/Getting the Code/Building and Installation Guide"
(Created page with "__TOC__ = Building OpenCV with GStreamer support = '''1. Install previous GStreamer dependencies''' <source lang="bash"> sudo apt-get install gstreamer1.0* sudo apt install...") |
|||
| Line 1: | Line 1: | ||
| + | <noinclude> | ||
| + | {{Birds Eye View/Head|next=Examples|previous=Getting the Code/How to get the code|keywords=}} | ||
| + | </noinclude> | ||
| + | |||
| + | <!-- If you want a custom title for the page, un-comment and edit this line: | ||
| + | {{DISPLAYTITLE:Birds Eye View - <descriptive page name>|noerror}} | ||
| + | --> | ||
| + | |||
| + | |||
__TOC__ | __TOC__ | ||
| Line 67: | Line 76: | ||
sudo ldconfig | sudo ldconfig | ||
</source> | </source> | ||
| + | |||
| + | <noinclude> | ||
| + | {{Birds Eye View/Foot|Getting the Code/How to get the code|Examples}} | ||
| + | </noinclude> | ||
Revision as of 16:03, 28 November 2019
| Birds Eye View |
|---|
 |
| Introduction |
| Getting the Code |
| Getting Started |
| Examples |
| Library Docs |
| Performance |
| Contact Us |
Building OpenCV with GStreamer support
1. Install previous GStreamer dependencies
sudo apt-get install gstreamer1.0*
sudo apt install ubuntu-restricted-extras
sudo apt install libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev
2. Install compiler and building dependencies
sudo apt-get install build-essential
sudo apt-get install cmake git libgtk2.0-dev pkg-config libavcodec-dev libavformat-dev libswscale-dev
sudo apt-get install python-dev python-numpy libtbb2 libtbb-dev libjpeg-dev libpng-dev libtiff-dev libjasper-dev libdc1394-22-dev
pip3 install numpy
3. Obtain source code from Github
git clone https://github.com/opencv/opencv.git
cd opencv/
git checkout 4.1.0
4. Configure with required flags
mkdir build
cd build
cmake -D CMAKE_BUILD_TYPE=RELEASE \
-D CMAKE_INSTALL_PREFIX=/usr/local \
-D INSTALL_PYTHON_EXAMPLES=ON \
-D INSTALL_C_EXAMPLES=OFF \
-D PYTHON_EXECUTABLE=$(which python3) \
-D BUILD_opencv_python2=OFF \
-D CMAKE_INSTALL_PREFIX=$(python3 -c "import sys; print(sys.prefix)") \
-D PYTHON3_EXECUTABLE=$(which python3) \
-D PYTHON3_INCLUDE_DIR=$(python3 -c "from distutils.sysconfig import get_python_inc; print(get_python_inc())") \
-D PYTHON3_PACKAGES_PATH=$(python3 -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())") \
-D WITH_GSTREAMER=ON \
-D BUILD_EXAMPLES=ON ..
5. Check configuration log
✔ Verify if it has Python 3: section and all interpreter and path are right. (If they aren’t there, check the numpy package)
✔ Check the GStreamer section. (If they do not say YES, go check GStreamer lib package)
6. Building
It will last some time. Please be patient.
sudo make -j4
7. Install the package
sudo make install
sudo ldconfig
