i.MX8 - Nitrogen8M - Getting Started

i.MX8
Introduction
SoC Overview Carrier Boards i.MX6 vs i.MX8
iMX8M Evaluation Kit (EVK)
Overview Getting Started Selecting Boot Mode System Setup Software Support Android_SD_Partitions_RidgeRun_Script Loading pre-built images Yocto Support Building Yocto Installing an Image Alternative image loading Android Support Building Android Installing an Image System Recovery
Nitrogen8M
Overview Getting Started Selecting Boot Mode System Setup Software Support Loading pre-built images Yocto Support Building Yocto Installing an Image Alternative image loading Customizing Boot Sequence Android Support Building Android Installing an image System Recovery
Multimedia
GPU OpenGL OpenCL OpenVX OpenVG Vulkan VPU Encoding System Decoding System ISP Support V4L2 Drivers Porting Guide GStreamer Support Package Installation Pipeline Examples Hardware-accelerated plugins RidgeRun Products GstRtspSink GstWebRTC GstPTZR GstQtOverlay
Reference Documentation
Contact Us

In this section, you are going to find all the information to start from scratch. You will find information about the board and how to configure your host machine in order to customize your own images.

• Selecting Boot Mode section that provides hints on how to configure the multiple boot options for the board.
• System Setup section that provides key steps to configure a development computer to start communicating/interacting with the board.
• Software Support section that provides a summary of the several running software to use on the board.
• Loading Pre-built Images section that provides the procedure to deploy pre-built software images on the board.