Difference between revisions of "IMX8/iMX8MEVK/Getting Started/Loading Pre-built Images"
< IMX8 | iMX8MEVK | Getting Started
| Line 16: | Line 16: | ||
Extract the image running the following command: | Extract the image running the following command: | ||
<pre> | <pre> | ||
| − | + | IMAGE_NAME=fsl-image-qt5-validation-imx-xwayland-imx8mqevk | |
| + | bunzip2 -dk -f $IMAGE_NAME.sdcard.bz2 | ||
</pre> | </pre> | ||
<noinclude>{{IMX8/Foot|<Replace with "previous" page>|<Replace with "next" page>}}</noinclude> | <noinclude>{{IMX8/Foot|<Replace with "previous" page>|<Replace with "next" page>}}</noinclude> | ||
Revision as of 11:18, 6 November 2018
|
Prebuilt images are .sdcard files, disk images that can be flashed directly to any SD card. These .sdcard files are the simplest way to evaluate the board and Linux features since they easily flash all the required components to boot the iMX8M EVK.
The .sdcard file includes the 4 elements required to boot the board:
- Bootloader
- Linux kernel image
- Device tree
- Root file system
You can get the prebuilt images from the latest Linux BSP. You need to decompress the BSP. For the BSP L4.9.88_2.0.0 run tar -xvf L4.9.88_2.0.0_images_MX8MQ.tar.gz. Then you will have a directory L4.9.88_2.0.0_images_MX8MQ, there is a compressed image:
- fsl-image-qt5-validation-imx-xwayland-imx8mqevk.sdcard.bz2
Extract the image running the following command:
IMAGE_NAME=fsl-image-qt5-validation-imx-xwayland-imx8mqevk bunzip2 -dk -f $IMAGE_NAME.sdcard.bz2
