IMX8/Nitrogen8M/Yocto

i.MX8
Introduction
SoC Overview Carrier Boards i.MX6 vs i.MX8
iMX8M Evaluation Kit (EVK)
Overview Getting Started Selecting Boot Mode System Setup Software Support Android_SD_Partitions_RidgeRun_Script Loading pre-built images Yocto Support Building Yocto Installing an Image Alternative image loading Android Support Building Android Installing an Image System Recovery
Nitrogen8M
Overview Getting Started Selecting Boot Mode System Setup Software Support Loading pre-built images Yocto Support Building Yocto Installing an Image Alternative image loading Customizing Boot Sequence Android Support Building Android Installing an image System Recovery
Multimedia
GPU OpenGL OpenCL OpenVX OpenVG Vulkan VPU Encoding System Decoding System ISP Support V4L2 Drivers Porting Guide GStreamer Support Package Installation Pipeline Examples Hardware-accelerated plugins RidgeRun Products GstRtspSink GstWebRTC GstPTZR GstQtOverlay
Reference Documentation
Contact Us

On this section you will find basic useful information on how to get started with the Yocto distribution recommended for your board. Additional information might be provided to speed up the whole development experience (installation hints, alternate / advanced boot methods, Yocto navigation among others).

• Building Yocto section that provides the basic steps to clone and build Yocto for the corresponding board.
• Installing an Image section that provides the steps to deploy the generated firmware images into a bootable device.
• Advanced image loading section that provides alternative booting options / hints / firmware loading steps.