Difference between revisions of "IMX8/Nitrogen8M/Getting Started/System Setup"
< IMX8 | Nitrogen8M | Getting Started
m |
m |
||
| Line 1: | Line 1: | ||
<!-- Please add custom keywords relevant to the page as arguments to the head macro. For example: | <!-- Please add custom keywords relevant to the page as arguments to the head macro. For example: | ||
| − | {{IMX8/Head | + | {{IMX8/Head}} |
| − | |||
You may leave them unspecified if custom keywords don't apply. | You may leave them unspecified if custom keywords don't apply. | ||
--> | --> | ||
| − | <noinclude>{{IMX8/Head}}</noinclude> | + | <noinclude>{{IMX8/Head|previous=Nitrogen8M/Getting Started/Selecting Boot Options|next=Nitrogen8M/Software Support|keywords=carrier,carrier board,base board,SOM,System on Module,Boundary Devices,Nitrogen8M,configure,configure host machine,serial console,serial communication,serial console}}</noinclude> |
{{DISPLAYTITLE:i.MX8 - Nitrogen8M System Setup |noerror}} | {{DISPLAYTITLE:i.MX8 - Nitrogen8M System Setup |noerror}} | ||
Revision as of 14:17, 8 December 2018
|
Setup serial console communication
Follow the next instructions to establish a serial communication with the board:
1. Shipped with the Nitrogen8M is a console serial cable. Plug that serial cable to the Nitrogen8M J14 connector, labeled as "SERIAL".
2. On the other end, you will need to attach the serial cable connector labeled "CONSOLE" to a serial port or more likely to an USB to serial converter.
3. Then just attach the USB cable from the converter to your computer.
And you are ready with the required console physical connection. Now you can use your favorite terminal application to access the board. If you are not familiar with any terminal application, for Linux you can use minicom or picocom, please try one of the following instructions:
