Difference between revisions of "IMX8/Nitrogen8M/Software Support"
< IMX8 | Nitrogen8M
m |
m |
||
Line 2: | Line 2: | ||
=Kernel= | =Kernel= | ||
− | The latest kernel version is 4.9.11, the repository can be accessed | + | The latest kernel version is 4.9.11, the repository can be accessed at the following link: |
[https://github.com/boundarydevices/linux-imx6/tree/boundary-imx_4.9.x_1.0.0_ga Linux Kernel repository] | [https://github.com/boundarydevices/linux-imx6/tree/boundary-imx_4.9.x_1.0.0_ga Linux Kernel repository] | ||
Line 27: | Line 27: | ||
=Building a Component= | =Building a Component= | ||
− | If you only need the bootimage, as example, choose only that target. | + | If you only need the bootimage, as an example, choose only that target. |
<pre> | <pre> | ||
~/myandroid$ make bootimage | ~/myandroid$ make bootimage |
Latest revision as of 15:18, 11 December 2020
|
Kernel
The latest kernel version is 4.9.11, the repository can be accessed at the following link:
Build instructions
The following instructions will build the kernel files required for booting the Nitrogen boards.
git clone https://github.com/boundarydevices/linux-imx6.git cd linux-imx6 export ARCH=arm export CROSS_COMPILE=arm-linux-gnueabihf- git checkout boundary-imx_4.9.x_1.0.0_ga make boundary_defconfig make zImage modules dtbs -j8
Updating Files
adb push arch/arm/boot/zImage /boot/ adb push arch/arm/boot/dts/<dtb_file> /boot/
Building a Component
If you only need the bootimage, as an example, choose only that target.
~/myandroid$ make bootimage
Update the files
adb push $OUT/boot/<dtb_file> /boot adb push $OUT/boot/zImage /boot adb push $OUT/boot/6x_bootscript /boot adb push $OUT/boot/uramdisk.img /boot
Reboot
adb reboot