Difference between revisions of "IMX8/iMX8MEVK/Yocto/Installing an Image"
| Line 15: | Line 15: | ||
</pre> | </pre> | ||
| − | ''' | + | This is an Output example: |
| + | <pre> | ||
| + | user@laptop:~$ blkid -o list | ||
| + | device fs_type label mount point UUID | ||
| + | --------------------------------------------------------------------------------------------------------------------------------------------------------------- | ||
| + | /dev/sda1 ext4 / 819c76f8-187f-46e9-b0c0-350032625bb3 | ||
| + | /dev/sda3 ext4 data /media/user/data 571e7aea-202e-4daa-8071-a1fc1207f458 | ||
| + | /dev/sda5 swap [SWAP] 4018cfb5-4201-4656-a005-4fe04d06dde1 | ||
| + | /dev/sdb1 ext4 sdcard (not mounted) fe2353ea-7436-457e-9447-8e3f721b0c43 | ||
| + | /dev/sdb2 | ||
| + | </pre> | ||
| + | |||
| + | |||
| + | '''Considerations''' | ||
Each device has numbers at the end, those numbers are related to partitions and they must not be specified to install the image. | Each device has numbers at the end, those numbers are related to partitions and they must not be specified to install the image. | ||
As example, instead of /dev/'''sdb1''', use /dev/'''sdb'''. | As example, instead of /dev/'''sdb1''', use /dev/'''sdb'''. | ||
| + | |||
| + | Also, The device '''must be not mounted''' to successfully write the image. | ||
=Installing= | =Installing= | ||
Yocto supports several image formats, as example ext4, img, sdcard and wic. | Yocto supports several image formats, as example ext4, img, sdcard and wic. | ||
| + | |||
| + | Those files will be created in '''<Yocto_Dir>/build/tmp/deply/images/imx8mevk'''. | ||
In old Yocto versions, the most common image type was sdcard, use '''dd''' with this image type. | In old Yocto versions, the most common image type was sdcard, use '''dd''' with this image type. | ||
Revision as of 14:51, 9 November 2018
|
In order to install an image, you must identify your device ID.
Check it as follows:
blkid -o list
This is an Output example:
user@laptop:~$ blkid -o list device fs_type label mount point UUID --------------------------------------------------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 819c76f8-187f-46e9-b0c0-350032625bb3 /dev/sda3 ext4 data /media/user/data 571e7aea-202e-4daa-8071-a1fc1207f458 /dev/sda5 swap [SWAP] 4018cfb5-4201-4656-a005-4fe04d06dde1 /dev/sdb1 ext4 sdcard (not mounted) fe2353ea-7436-457e-9447-8e3f721b0c43 /dev/sdb2
Considerations
Each device has numbers at the end, those numbers are related to partitions and they must not be specified to install the image. As example, instead of /dev/sdb1, use /dev/sdb.
Also, The device must be not mounted to successfully write the image.
Installing
Yocto supports several image formats, as example ext4, img, sdcard and wic.
Those files will be created in <Yocto_Dir>/build/tmp/deply/images/imx8mevk.
In old Yocto versions, the most common image type was sdcard, use dd with this image type.
sudo dd if=<image.sdcard> of=/dev/<device> bs=4M && sync
Recent Yocto versions have wic image type as default format, use bmaptool as follows:
sudo bmaptool copy <image.wic> /dev/<device> --nobmap
