Difference between revisions of "IMX8/Nitrogen8M/Software Support"
< IMX8 | Nitrogen8M
m |
m |
||
Line 1: | Line 1: | ||
− | <noinclude>{{IMX8/Head|carrier,carrier board,base board,SOM,System on Module,Boundary Devices,Nitrogen8M,configure,configure host machine,software,Yocto,Embedded Android,Source Code}}</noinclude> | + | <noinclude>{{IMX8/Head|previous=Nitrogen8M/Getting Started/System Setup|next=Nitrogen8M/Getting Started/Loading Pre-built Images|keywords=carrier,carrier board,base board,SOM,System on Module,Boundary Devices,Nitrogen8M,configure,configure host machine,software,Yocto,Embedded Android,Source Code}}</noinclude> |
=Kernel= | =Kernel= |
Revision as of 14:20, 8 December 2018
|
Kernel
The latest kernel version is 4.9.11, the repository can be accessed in the following link:
Build instructions
The following instructions will build the kernel files required for booting the Nitrogen boards.
git clone https://github.com/boundarydevices/linux-imx6.git cd linux-imx6 export ARCH=arm export CROSS_COMPILE=arm-linux-gnueabihf- git checkout boundary-imx_4.9.x_1.0.0_ga make boundary_defconfig make zImage modules dtbs -j8
Updating Files
adb push arch/arm/boot/zImage /boot/ adb push arch/arm/boot/dts/<dtb_file> /boot/
Building a Component
If you only need the bootimage, as example, choose only that target.
~/myandroid$ make bootimage
Update the files
adb push $OUT/boot/<dtb_file> /boot adb push $OUT/boot/zImage /boot adb push $OUT/boot/6x_bootscript /boot adb push $OUT/boot/uramdisk.img /boot
Reboot
adb reboot