i.MX8 - iMX8MEVK - Getting Started - Loading Pre-built Images

i.MX8
Introduction
SoC Overview Carrier Boards i.MX6 vs i.MX8
iMX8M Evaluation Kit (EVK)
Overview Getting Started Selecting Boot Mode System Setup Software Support Android_SD_Partitions_RidgeRun_Script Loading pre-built images Yocto Support Building Yocto Installing an Image Alternative image loading Android Support Building Android Installing an Image System Recovery
Nitrogen8M
Overview Getting Started Selecting Boot Mode System Setup Software Support Loading pre-built images Yocto Support Building Yocto Installing an Image Alternative image loading Customizing Boot Sequence Android Support Building Android Installing an image System Recovery
Multimedia
GPU OpenGL OpenCL OpenVX OpenVG Vulkan VPU Encoding System Decoding System ISP Support V4L2 Drivers Porting Guide GStreamer Support Package Installation Pipeline Examples Hardware-accelerated plugins RidgeRun Products GstRtspSink GstWebRTC GstPTZR GstQtOverlay
Reference Documentation
Contact Us

Prebuilt images are .sdcard files, disk images that can be flashed directly to any SD card. These .sdcard files are the simplest way to evaluate the board and Linux features since they easily flash all the required components to boot the iMX8M EVK. You can get the prebuilt images from the latest Linux BSP

The .sdcard file includes the 4 elements required to boot the board:

• Bootloader
• Linux kernel image
• Device tree
• Root file system

To get the prebuilt images you need to decompress the BSP, then you will have a directory L4.9.88_2.0.0_images_MX8MQ.